NewLook QuickEtch™ ~ Biodegradable Surface Etching Solution
NewLook QuickEtch™ is a biodegradable concrete etching compound specially designed to profile the surfaces of both green (fresh) and mature concrete. The depth of the etching achieved with this product is the same as hydrochloric or muriatic acid with 80% less odor and a more uniform etch than liquid etch materials. Safer to use than hydrochloric or muriatic acid, the residue is easily removed by rinsing with water. The gelled form of NewLook QuickEtch™ provides a profiling solution with low/no dust compared with sandblasting, grinding or shotblasting. (Not to be used as a cleaner).
Use QuickEtch with Modello's easy to-use stencils to etch a non-slip decorative pattern. The longer you leave QuickEtch on the suface, the greater the etch.
Coverage is approximately 50 - 150 square feet (5-9 square meters) per gallon. Available in 1 gallon, 5 gallon, 55 gallon, and even tote containers.
Features and benefits
- Water Base, Non Flammable
- Contains No TAP’s or HAP’s (Toxic/Hazardous Air Pollutants)
- Easy clean up with soap and water or denatured alcohol
Recommended Usage
- Green and Mature Concrete
- Factory and Warehouse floors
- Exposed vertical or overhead concrete
- Masonry that needs to be etched
- Decorative Concrete Stencil etching
Note: EcoAcid is primarily used to clean the surface in preparation for staining with Concrete Color Stains. It will (slightly) etch a non-porous substrate, especially when compared to QuickEtch, which is used to thoroughly etch/profile your concrete and completely open the surface pores in preparation for staining with Concrete Color Stains.
Enhancer™ sprayed on etched surface.
© 2011 NewLook International, Inc. All Rights Reserved
Surface Preparation
Beautify & Revitalize
Protect (Sealers) & Maintain
FloorGuard WB Sealer
Slip-Resistant Grit
DriveHard Pro
Tools