Pair with other NewLook products for the best results

NewLook strongly recommends using these specific brushes to install concrete stains and cannot guarantee (or warrant) results if the concrete stains are applied without them. Do not use, however, to install paint, epoxy or other top coat concrete and cement sealers. Paint and other high-build coatings should be applied with paint rollers or other brushes.

 

Resources & Packaging

3″ Round Designer Applicator Brush Head

Use on smaller jobs and for dipping into the bucket

4″ Round Designer Applicator Brush Head

Used in faux finishing techniques for dry-brush technique.

8˚ Round Designer Applicator Brush Head

Use on smaller jobs and for dipping into the bucket

10″ Round Designer Applicator Brush Head4

Use on smaller jobs and for dipping into the bucket.

10″ Round Designer Applicator Brush Head4

Use on larger projects for re-brooming the ORIGINAL Solid Color Stain. Large brush spreads stains quickly saving on labor costs.

NOTE:

The NewLook Applicator Brush is the only tool recommended for installing the ORIGINAL Solid Color Stain or CoolStain PRO. It is the most effective tool for saturating the concrete stain material and pushing it deep into the pores of a concrete or cement surfaces. It is for this reason that the NewLook Applicator Brush is the only brush NewLook warrants or recommends.

Scroll to Top